Protect your Hot Tub with a Cornish Hot Tub Maintenance Contract

What is a Cornish Hot Tubs Maintenance Contract?

We recognise that you want your hot tub ready to use when you want to use it throughout the year. A Cornish Hot Tubs Maintenance Contract spreads the cost over a full 12 months to help you avoid any ‘One-off’ hefty bills.

Prior to a contract being signed we will arrange a FREE, no Obligation site survey to verify that your hot tub is in a suitable condition to be able to offer a Maintenance Contract.

We will advise you of the most appropriate standard of cover to suit the present use of your hot tub and how best to proceed should there be any repairs or new parts needed prior to acceptance on the scheme.

A Maintenance Contract will not only keep your hot tub in peak condition, but will also help us to efficiently plan our maintenance and servicing throughout the year, keeping overall costs down.

To book your FREE, no obligation site survey or for further information please contact us.

Our Maintenance Contracts

Monthly Cost £15
Callout 50%
Labour Discount 50%
Chemicals Discount 5%
Filters Discount 5%
Accessories Discount 5%
Covers Discount 5%
Parts Discount x
Jets Discount x
Headrest Discount x
Annual Service (12 months) 10%
Water Change (3 Months) x
* Prices may vary for Devon locations
Sign up Now

 

Monthly Cost £25
Callout No Charge
Labour Discount 50%
Chemicals Discount 10%
Filters Discount 10%
Accessories Discount 10%
Covers Discount 10%
Parts Discount 25%
Jets Discount 25%
Headrest Discount 25%
Annual Service (12 months) 25%
Water Change (3 Months) x
* Prices may vary for Devon locations

 

Sign up Now
Monthly Cost £45
Callout No Charge
Labour Discount No Charge
Chemicals Discount 15%
Filters Discount 50%
Accessories Discount 10%
Covers Discount 15%
Parts Discount 50%
Jets Discount 50%
Headrest Discount 50%
Annual Service (12 months) 1 Free
Water Change (3 Months) 2
* Prices may vary for Devon locations
Sign up Now
 Monthly Cost £35
Callout x
Labour Discount x
Chemicals Discount 10%
Filters Discount 10%
Accessories Discount 10%
Covers Discount 10%
Parts Discount x
Jets Discount x
Headrest Discount x
Annual Service (12 months) 1 Free
Water Change (3 Months) 2
* Prices may vary for Devon locations

 

Sign up Now

Spread the cost of your Annual Service by pre Paying.
We take a monthly payment and after 10 months you have your service.

Monthly Cost £20
Service Cost £200
What we do during the service
  • Remove filter(s) and perform visual check of filter condition
  • Check all plumbing including pipe and heater unions and isolation valve connections
  • Check all joint O-rings or gaskets.
  • Check jet body to hot tub shell joints for integrity
  • Run all pumps to ensure satisfactory operation
  • Check operation of system diverter valves, if fitted, and air control operation
  • Check all jets for satisfactory operation
  • Operate air blower, if fitted, and check satisfactory operation. Visually check that all the air injectors are allowing air through.
  • Check visually all equipment interconnecting wiring for integrity and insulation.
  • Check the control system and topside controls for operation of each function. Jet Booster pump(s), Circulation Pump, Air Blower, Filter Cycle setting, Heating capability
  • Deep clean and flush the hot tub plumbing and pipe work system including pump wet end and heater tube. (Spa Flush)
  • Test the hot tub LED and lighting system.
  • Drain water from the hot tub and system.
  • Rinse spa thoroughly, drain and vacuum out excess water from pipe work and jet bodies.
  • Wipe clean Hot Tub shell surface.
  • Refill with clean water to the required operating level.
  • Fit new or cleaned filters into the hot tub skim filter. (Filters used will be customers own pre-cleaned or new – only if purchased
  • Add pH+ or pH- to begin the correction of the pH level to attain a level of 7.2 to 7.4.
  • Add Sanitiser to achieve a level of 2-4ppm (mg/l) Chlorine or 3-5ppm (mg/l) Bromine
  • Check operation of all Spa equipment from the control touch pad. Check operation of the heater and mode functions.
  • Vacuum skimmer and pump suctions fittings.
  • Perform a test of the RCD if available and accessible
  • Wipe down acrylic rim
  • Check tub surround and report any damage
  • Close cover, wipe down and report on cover condition.